UP 924 Nassau to South Bimini Flight Status

Bahamasair Flight UP924 from Nassau Lynden Pindling International Airport NAS to South Bimini Airport BIM is not scheduled for today February 6th, 2023.
The last time the flight was scheduled was on November 27th, 2022.
Check the table below for UP924's most recent flight history:

UP 924 Flight Status & Schedule

Date Departure Arrival Status
27/11 06:48 07:18
Track >

Bahamasair UP 924 Nassau to South Bimini Flight Information

Bahamasair Flight UP924 connects Nassau, Bahamas to South Bimini, Bahamas, taking off from Nassau Lynden Pindling International Airport NAS and landing at South Bimini Airport BIM.

How long is the UP924 flight from Nassau to South Bimini?

The average flight time from Nassau to South Bimini is 30 minutes. The flight distance is 195 km / 121 miles and the average flight speed is 390 km/h / 242 mph.

What is the average delay of flight UP924?

The average delay of flight UP924 is 3 minutes and the flight is on-time 0% of the times.

What is the On-Time Performance (OTP) of Bahamasair Flight UP924 Nassau to South Bimini?

The Airportia On-Time Performance Rating for Bahamasair Flight UP924 is 5/5 stars. This metric is calculated using data from the past 10 flights.

When was the latest UP924 flight?

The latest flight took off on Sunday, November 27th, 2022 with the flight status being Landed on 07:18.

How else can the flight UP924 be referenced as?

This Bahamasair flight can also be referenced as BHS924, UP0924, UP 924, BHS 924.

See our UP924 Flight Tracker above for more details.

Other Nassau NAS and South Bimini BIM Flights

Other flights departing from Nassau NAS: UP315, PL501, PNP960, WU516

Other flights arriving at South Bimini BIM: AJ6021, WU1015

There are flights connecting Nassau NAS to South Bimini BIM.

All NAS to BIM Flights >

UP924 Bahamasair Flight: Nassau to South Bimini Route Map

UP924 Bahamasair Flight Map: Nassau to South Bimini
Flight Delay Compensation up to 600€: Claim compensation for your flight delay or cancellation >